Olympus BX3-SSU Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt medyczny Olympus BX3-SSU. Olympus BX3-SSU 24 stron. Scanning stage with ultrasonic
Również dla Olympus BX3-SSU: Instrukcja obsługi (20 strony)

Drukuj stronę

IMPORTANT

SAFETY PRECAUTIONS

Safety Symbols

The following symbols are found on this system. Study the meaning of the symbols and always use the equipment in

the safest possible manner.

Symbol

Downloaded from

ManualsNet.com

CAUTION

Fig. 1

Indicates a non-specific general hazard. Follow the description given after this symbol or in

instruction manual.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

Indicates a potential fire hazard; when replacing fuses, be sure replacement fuses are of the

specified rating.

search engine

} This manual pertains only to the information related to the scanning stage

with ultrasonic and associated modules.

Before using this instrument together with the microscope and associated

modules, make sure that you have carefully read their manuals and

understand how the system should be operated together.

To ensure the performance, we recommend that you have your

Olympus representative assemble and adjust the scanning

stage with ultrasonic.

1. Install the microscope on a level (inclination less than ±2°) surface on a

sturdy table or bench.

2. To prevent obstruction of the air vents 2 on both sides of the control box

@ for BX3-SSU, always install it longitudinally and make sure to leave at

least 10 cm of free spaces around them.

Also, to prevent malfunction or electric shock, do not allow a wire or thin

object to enter the air vents.

When installing the BX3-CBH/IX3-CBH and the control box for

BX3-SSU side by side, always install the BX3-CBH/IX3-CBH on

the left to enable effective heat radiation.

3. Always use the power cord provided by Olympus. If no power cord is

provided, please select the proper power cord by referring to the section

"PROPER SELECTION OF THE POWER SUPPLY CORD" at the end of this

instruction manual. If the proper power cord is not used, product safety

performance cannot be warranted.

4. Always ensure that the grounding terminal of the instrument and that of

the wall outlet are properly connected. If the equipment is not grounded,

Olympus can no longer warrant the electrical safety performance of the

equipment.

5. The power cord can be used to shut down the power supply in case of

emergency. To make this possible, place the power cord plug in an easily

accessible location.

Explanation

(Fig. 1)