Olympus SZ2-ILLC Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny Olympus SZ2-ILLC. Olympus SZ2-ILLC 16 stron. Coaxial illuminator
Również dla Olympus SZ2-ILLC: Instrukcja obsługi (16 strony)

Drukuj stronę

1. Assembly

Maintenance and Storage

1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower and wipe

gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it gauze slightly moistened with commercially available absolute

alcohol.

Since the absolute alcohol is highly flammable, it must be handled carefully.

Be sure to keep it away from open flames or potential sources of electrical sparks –– for example, electrical

equipment that is being switched on or off.

Also remember to always use it only in a well-ventilated room.

# To clean the half mirror inside the coaxial illuminator, simply remove dust and dirt with a blower, etc. If the half

mirror is still dirty after blowing, please contact Olympus.

2. Do not attempt to use organic solvents to clean the parts other than the glass components. To clean them, use a lint-free,

soft cloth slightly moistened with a diluted neutral detergent.

3. Do not disassemble any part of the equipment as this could result in malfunction or reduced performance.

SZ2-ILLC