Olympus SZ2-STB3 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny Olympus SZ2-STB3. Olympus SZ2-STB3 12 stron. Arms used with microscopes for equipment mounting

Drukuj stronę

Fig. 6

To increase

Fix this

knob.

Fig. 7

Attaching the LSGA Illuminator

# The LSGA cannot be attached ton the SZ2-STB2 and SZ2-STP.

Using the IHA or IHD holder, the LSGA illuminator can be attached to any

of the five (or three with the SZ2-STB3 in combination with the IHA mount-

ing holder) LSGA attaching positions @ on the arm.

For details, refer to the instruction manual for the LSGA.

Adjusting the Focus Adjustment Knob Tension

1. Hold the left and right focus adjustment knobs @ with two hands, fix one

knob and rotate the other knob to increase or decrease the tension ac-

cording to the rotation direction.

To decrease

2. This operation is intended to adjust the force required for rotating the knob

while preventing spontaneous lowering of the microscope frame. To ob-

tain highest ease of use, it is recommended to adjust the tension at a

slightly higher level than the level at which spontaneous lowering occurs.

(Fig. 6)

(Fig. 7)