Olympus SZX2 Series Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny Olympus SZX2 Series. Olympus SZX2 Series 16 stron. Coaxial vertical illuminators

Drukuj stronę

1. Table of Contents
2. Important - be Sure to Read this Chapter for Safe Use of the Equipment
3. Assembly

Fig. 3

Fig. 4

2. Loosen the light guide clamping screws 5 on the coaxial vertical illumi-

nator with the Allen screwdriver. Insert the outgoing light guide end 6 until

it stops (the force required for insertion will increase in the middle due to a

spring). Tighten the clamping screws 5.

Mounting the Quarter-Wave Plate

1. Loosen the two quarter-wave plate clamping knobs @.

2. Fit the quarter-wave plate onto the tip of the objective ² and secure the

clamping knobs.

# The quarter-wave plate should be mounted so that the clamping knobs

are on the side when seen from the front of the microscope (i.e., so

that the module indication faces the front).

(Fig. 4)