Axley 760027 Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla grill Axley 760027. Axley 760027 11 stron.
Drukuj stronę
10. Wire shelf/wheel axle
11. Wheel
12. Ash pan
FIG. 1
Assembly parts included
Number
6
2
6
3
ASSEMBLY
1.
Fit the handle (1) on the outside of the lid and hook (4) on
the inside of the lid (3) with the screws and nuts (C).
Screw the two parts of the handle together with the two
screws A.
2.
Fit the side handle for the grill bowl in the same way.
3.
Press the clip arms (D) together and slip on each leg.
4.
Undo the prefitted screws and washers on the legs. Turn the
grill bowl upside down. Press the longest leg (front leg) in
the leg retainer (8). Insert into the hole in the bottom next
to the handle. Fasten the leg in the bowl with the screws and
washers.
Fit the other two legs in the same way. Note that there is
one left leg and one right leg.
5.
Undo the prefitted screws on the wire shelf. Hook the wire
shelf (10) on the front leg and push the axle through the
back legs. Fit the wheels (11) on the axle with the nuts.
6.
Adjust the clips (D) so that the ash pan is held in place.
7.
Screw the small air valve (2) on the lid and the large air valve
on the bowl. Use the screws and nuts B.
8.
Put the fire grate (6) and grill rack (5) in place.
9.
Check that all the screw unions are properly tightened.
Description
A
B
C
D
EN
11