Alpha-InnoTec LWP450AR3 Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do pomp ciepła Alpha-InnoTec LWP450AR3. Alpha-InnoTec LWP450AR3 20 stron. Air/water heat pumps
Drukuj stronę
4
Operation and care
NOTE
The device is operated via the control panel
of the heating and heat pump controller
(
operating manual for the heating and
heat pump controller).
4.1 Energy and environmentally
conscious operation
The generally accepted requirements for energy
conscious and environmentally conscious operation of
a heating system also apply to the use of a heat pump.
The most important measures include:
No unnecessarily high domestic hot water
temperature (note and follow local regulations)
Do not open windows with gap / tilt open
(continuous ventilation), but instead open wide for
a short time (shock ventilation).
Always ensure that the controller settings are
correct.
4.2 Maintenance
Wipe down the outside of the device only using a damp
cloth or cloth with mild cleaning product (washing up
liquid, neutral cleaning product). Do not use any harsh,
abrasive, acid or chlorine-based cleaning products.
8
Subject to technical amendments without notice | 83059700gUK – Translation of the operating manual | ait-deutschland GmbH
5
Delivery, storage, transport
and installation
5.1 Scope of supply
Check delivery immediately after receipt for
externally visible damage and completeness.
Notify supplier of any defects immediately.
The accompanying parts package contains
The wall-mounted controller and the outdoor
sensor as an accompanying package. The box is
in the free space in front of the condenser.
A mailing envelope with 4 anti-slip mats for setting
down is attached to the outside of the device.
5.2 Storage
Do not unpack the unit until directly before
installation if possible.
Store unit protected against:
Moisture/damp
Frost
Dust and dirt
5.3 Unpacking and transport
Notes on safe transport
The device is heavy (
supply" on page 17). There is a risk of injuries or
damage to property if the device falls or overturns.
There is a risk of cutting your hands on sharp edges of
the device.
Wear cut-resistant protective gloves.
The hydraulic connections are not designed for
mechanical loads.
Do not lift or transport the device by the hydraulic
connections.
"Technical data/Scope of