Axminster 107699 Oryginalna instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Oryginalna instrukcja obsługi dla Tokarka Axminster 107699. Axminster 107699 17 stron. Woodturning lathe

OPERATING INSTRUCTIONS

Removing Tailstock Assembly

Fig 13

The tailstock can be removed to give you extra movement when turning. Remove the tailstock stop from the end of

the lathe bed and place safely aside. Release the locking handle and slide the asssembly off the lathe bed, see fig

13-14.

Removing the Faceplate

DISCONNECT THE LATHE FROM

THE MAINS SUPPLY BEFORE

CONTINUING!

Insert the push rod into the machined hole on the

spindle, place the supplied spanner over the

faceplate boss and while holding the push rod,

rotate the spanner anti-clockwise to loosen the

face plate. Unscrew and place safely away, see fig

15.

MAINTENANCE

Daily After Use

1. Clean wood shavings away from the lathe bed and

tool rest.

2. Spray a light coat of Camellia Oil or Axcaliber Dry

Lubricant, (see our website/cataloge for details) over the

lathe bed, to allow the banjo and tailstock to run more

smoothly over the bed, also spray the headstock

spindle and tailstock barrel to prevent corrosion, see

fig 16.

Fig 14

Oil points

Fig 15

Loosen

Fig 16