Axminster AW19FM Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Narzędzia Axminster AW19FM. Axminster AW19FM 12 stron. Morticers
Również dla Axminster AW19FM: Podręcznik użytkownika (20 strony)

Drukuj stronę

General Instructions for 230v Machines...

A X M I N S T E R

W H I T E

• Clean machines by wiping with a damp soapy cloth. Do not use solvents or cleaners that may

damage plastic parts or painted/coated surfaces. Keep water and solvents away from all electrical

components, leads and plugs.

• When storing or leaving tools for any length of time, spray bare metal surfaces with Axminster XMP

protective spray to minimise surface corrosion.

• Always isolate machines and power tools from the power supply when not in use or when changing

parts, cutters and blades or when making any adjustments.

• Before using any machine or power tool, ensure that all locking-nuts, chucks etc, are tightened and

secure. Check that all loose keys, spanners and other tools have been removed.

• Always ensure that long hair is tied back or retained by a band, hat or safety helmet. Remove all

loose jewellery to prevent it from catching in rotating parts of the machine.

• Always check that the correct machining or cutting speed has been selected.

• Do not operate machinery or power tools when tired or under the influence of alcohol, drugs or

certain medicines.

• WHEN USING MACHINES ALWAYS WEAR SUITABLE EYE PROTECTION, EAR DEFENDERS

AND DUST OR FUME INHALATION PROTECTION.

• WARNING!! KEEP TOOLS AND EQUIPMENT OUT OF THE REACH OF CHILDREN, UNLESS

THEY ARE UNDER SUPERVISION.

Speciﬁc Safety Instruction for Morticers...

• Ensure that the morticer is firmly fixed to its base as the force exerted through the

operating handle could be enough to over-balance the machine.

• Ensure that the operating handle is returned to the upright position after cutting a

mortice.

• Mortice chisels have very sharp ends, handle them with great care.

• Make sure that the timber is held firmly down against the table, either with the vice or the

hold

down clamps. This prevents the possibility of the timber being pulled upwards as the

mortice chisel is withdrawn from the hole.

www.axminster.co.uk

Illustrated Parts Catalogue & Parts Breakdown...

FREEPHONE

Clamping Bar Assembly

0800 371822

A X M I N S T E R

W H I T E