Axminster SSBP Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Narzędzia Axminster SSBP. Axminster SSBP 16 stron. 305mm & 750mm sheet metal workers

General Safety Instructions...

A X M I N S T E R

W H I T E

Good Working Practices/Safety

The following suggestions will enable you to observe good working

practices, keep yourself and fellow workers safe and maintain your tools and

equipment in good working order.

• Mount the machine on a flat level bench or surface. Secure the machine to the surface where

applicable.

• Always use machines in an uncluttered area. To reduce the risk of accidents, avoid leaving

materials or other items within the working area and allow clear access to all machine parts

and controls.

• Clean machines by wiping with a oily rag. Do not use solvents or cleaners that may

cause damage to painted/coated surfaces.

• When storing or leaving the machine for any length of time, spray bare metal surfaces

with a protective spray to minimise surface corrosion.

• Before using the machine, ensure that all locking-nuts, chucks etc, are tightened and

secure. Check that all loose keys, spanners etc. have been removed.

• Always ensure that long hair is tied back or retained by a band, hat or safety helmet. Remove all

loose jewellery to prevent it from catching in rotating machinery.

• Always check that the correct machining or cutting speed has been selected.

• Do not operate machine when tired or under the influence of alcohol, drugs or certain medicines.

• WHEN USING THE MACHINE ALWAYS WEAR THE APPROPRIATE EYE PROTECTION, EAR

DEFENDERS AND DUST OR FUME INHALATION PROTECTION.

Speciﬁc Safety Instructions...

• Ensure that the machine is bolted firmly to a workbench before starting work.

• Keep fingers away from the rollers, the bending dies and the shearing blades.

• Do not wear loose clothing which might get drawn into the machine.

• Keep the top cover closed when the rollers are not in use.

WARNING!!

www.axminster.co.uk

KEEP TOOLS AND EQUIPMENT OUT

OF THE REACH OF YOUNG CHILDREN