Alphacom a300 Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon Alphacom a300. Alphacom a300 20 stron. Range headsetphone

Drukuj stronę

14.

Operating Procedures

12.

OPERATING PROCEDURES

Three modes of operation are provided; normal handset mode where the handset

Three modes of operation are provided; normal handset mode where the handset is

is lifted and replaced in the normal manner, headset mode where conversation is

lifted and replaced in the normal manner, headset mode where conversation is

conducted through the headset and handsfree mode where the caller or called party is

heard through a loudspeaker built into the telephone and a microphone (again built into

the telephone) picks up your voice.

When making or receiving a telephone call, you can alternate among the three modes of

operation.

On dialling the required telephone number, the display will change to indicate the dialled

number.After a short period of time, the display will show,Auto Timer. If the number has

number. After a short period of time, the display will show, Auto Timer. If the number

more than 16 digits, the display will scroll to the left and only the last 16 digits of the

has more than 16 digits, the display will scroll to the left and only the last 16 digits of the

number will be shown.When the call is completed the display will revert to current time.

The display shows:

�

14.1

12.1 HANDSET OPERATION

Pick up the handset and if making a call, await dial tone and dial the required telephone

number. On completion of the call, replace handset in cradle.

12.2 HEADSET OPERATION

HEADSET BUTTON

14.2

Using the headset button, you can make calls via the headset without having to

move the handset to do so. By pressing the headset button you can obtain a line,

answer an incoming call or disconnect the current call.

IMPORTANT

Calls can be transferred from the handset or handsfree mode to the headset only if

a headset is connected to the telephone.

HEADSET 'ON' LED

While calls are being made using the headset, the headset 'ON' LED lights up to

indicate that a call is in progress.The light goes out if no calls, or calls using the

handset or via handsfree mode, are being made.

HEADSET VOLUME CONTROL

A headset volume control on the right hand side of the telephone allows you to

select the most comfortable listening volume for the headset.The volume can be

set or changed at any time.

TRANSFERRING CALL FROM HANDSFREE TO HEADSET

To transfer a call from Handsfree to Headset, press the Headset button, the LED on

the Headset button will illuminate.When in headset mode, pressing the speaker

button once will transfer the call to handsfree mode.

TRANSFERRING CALL FROM HANDSET TO HEADSET

To transfer a call from Handset to Headset, press the Headset button, the LED on

the Headset button will illuminate.To transfer a call from headset mode to handset

, simply pick up the handset from the cradle.

Recall

pause

(TBR)

HANDSET OPERATION

pick up the handset and if making a call, await dial tone and dial the

required telephone number. On completion of the call, replace handset in

cradle.

HEADSET OPERATION

HEADSET BUTTON

Using the headset button, you can make calls via the headset without

having to move the handset to do so. By pressing the headset button you

can obtain a line, answer an incoming call or disconnect the current call.

IMpORTANT

Calls can be transferred from the handset to the headset only if a headset is

connected to the telephone.

HEADSET 'ON' LED

While calls are being made using the headset, the headset 'ON' LED lights

up to indicate that a call is in progress. The light goes out if no calls, or calls

using the handset, are being made.

HEADSET VOLUME CONTROL

A headset volume control on the right hand side of the telephone allows you

to select the most comfortable listening volume for the headset. The volume

can be set or changed at any time.

Store

-9-

Batt

Shift

Low

Mute