Axminster BS100 Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Sander Axminster BS100. Axminster BS100 17 stron. Belt sander

Drukuj stronę

person in charge of service.

In the case that you are not going to work on the machine, turn off the machine.

Before doing any maintenance work inside the machine or cleaning the machine,

switch off the machine and unplug the plug from power supply

Do not neglect performance of regular inspections in accordance with the instructions

for use.

Use certified safety equipments regarding to PPE directives. Splinters or air-borne

debris can cause irritation, injury and/or illness.

Dress properly. Do not wear tie, gloves, or loose clothing. Remove watch, rings, and

other jewelry. Roll up your sleeves. Clothing or jewelry caught in moving parts can

cause injury.

Do not use the machine in a dangerous environment. The use of power tools in damp

or wet locations or in rain can cause shock or electrocution.

Maintain all tools and machines in peak condition. Keep tools sharp and clean for

best and safest performance. Follow instruction of lubricating and changing

accessories. Poorly maintained tools and machines can further damage the tool or

machine and/or cause injury.

Check for damaged parts. Before using the machine, check for any damaged parts.

Check for alignment of moving parts, binding of moving parts, breakage of parts and

any other conditions that may affect its operation. A guard or any other part that is

damaged should be properly repaired or replaced. Damaged parts can cause further

damage to the machine and/or injury.

Keep children and visitors away. Workshop is a potentially dangerous

Children and visitors may be injured.

Reduce the risk of unintentional starting. Make sure that the switch is in the "OFF"

position before plugging in the power cord. In the event of a power failure, switch the

switch to the "OFF" position.

Check to see that all guards are in place, secured, and working correctly to prevent

injury.

Remove adjusting keys and wrenches before starting the machine. Tools, scrap

pieces, and other debris can be thrown at high speed, causing injury.

Use recommended accessories. The use of accessories and attachments not

recommended by our company may cause damage to the machine or injury to the

user.

Make sure your extension cord is in good condition. When using an extension cord,

be sure to use one heavy enough to carry the running current. An undersized cord

will cause a drop in line voltage, resulting in loss of power and overheating. Refer to

EN 60204-1:2006 for the correct size depending on the cord length and full-load

rating on the nameplate.

Secure the workpiece. Use clamps or a vise to hold the workpiece when practical.

Loss of control of the workpiece can cause injury.

Feed the workpiece against the direction of the rotation of the belt. Feed it from the

other direction will cause the workpiece to be thrown out a high speed.

Don't force the workpiece on the machine. Damage to the machine and/or injury may

result.

Don't overreach. Loss of balance can make you fall into a working machine, causing

injury.

Never stand on the machine. Injury could occur if you accidentally contact the

running belt.

Don't leave the machine until it comes to a complete stop. A child or visitor could be

injured.

Turn the machine to 'OFF' position and disconnect the machine from the power

source before installing or removing accessories, before adjusting or changing set-up

can cause injury.

Make the machine childproof with padlocks. The accidental start-up can cause injury.

6 / 16

environment.