Axminster AWWSG Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Szlifierka Axminster AWWSG. Axminster AWWSG 16 stron. 150/200mm wetstone grinder
Setting up the Grinder...
W
A X M I N S T E R
W H I T E
Please read the section entitled Identification and Description of Parts, in order for
you to understand the terminology that we will use, so that you may better
understand the working and capability of your grinder. Keep this manual to hand for
reference for any other personnel that may be required to use the grinder.
Having assembled all the grinder attachments loosely, now the machine has to be set up
correctly and all the attachments securely fastened.
Place the grinder on a flat level surface.
Position the tool rest leaving a gap of approximately one and a half millimetres between the
grindstone and the rest, with the rest horizontal (preferably) tighten the star nut securely.
(See fig 4)
!
Remember to adjust the tool rest as the grindstone wears down.
Adjust the spark guard until it is just clear of the grindstone; fasten the fixing bolt securely.
(See fig 5)
!
Remember to adjust the spark guard as the grindstone wears down.
Fig 4
Star nut
Adjust the spark guard until it is
just clear of the grindstone
Position the eye shield on its pivot bolt, (if necessary, 'nip' the clamping bolt of the eye
shield clamp so that the eye shield remains in place).
If there is any tendency for the grinder to move, tip or tilt while it is being operated, it should
be bolted down; either to the bench or to a specific stand or base board.
It is a good idea to dress new grindstones before use, to remove any possible irregularities,
and ensure the stones are running concentrically.
08
www.axminster.co.uk
Leave a gap of approximately
one and a half millimetres
between the grindstone
and the rest
Fig 5