Axminster Craft AC200WSG Oryginalna instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Oryginalna instrukcja obsługi dla Szlifierka Axminster Craft AC200WSG. Axminster Craft AC200WSG 17 stron. Wide stone
Specification
Setting Up the Grinder
Place the grinder on a flat level surface. There are two
machined slots to either side of the grinder housing to
bolt the machine onto a work bench if required, see fig 01.
Adjust the two tool rests leaving a gap of approximately
1.5mm clearance between the grinding stone and the tool
rest, see fig 02
Fig 01
Code
Model
Rating
Power
Speed
Wheel Diameter
Wheel Width
Grit
Bore
Overall L x W x H
Weight
NOTE: ADJUST THE TOOL RESTS
AS THE GRINDING STONE WEARS
DOWN.
1.5mm
clearance
8
105842
AC200WSG
550W 230V 50Hz 1Ph
2,850rpm
200mm
25mm & 40mm
25mm 60 grit & 40mm 80 grit
15.88mm
420 x 310 x 315mm
Fig 02
Craft
18kg