AccuMed AT2102 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Termometr AccuMed AT2102. AccuMed AT2102 13 stron. Infared thermometer
Również dla AccuMed AT2102: Skrócona instrukcja obsługi (6 strony)

Drukuj stronę

System.

3. Audible alarm if temperature is more than 38°C (100.4°F).

4. Internal storage can hold up to 32 temperature measurements.

5. Backlit LCD digital display screen.

6. Temperature unit can be displayed in either Celsius or Fahrenheit.

7. Automatic power-off (30 sec) to conserve energy.

8. Longevity use (40,000 readings).

9. Practical, easy to use.

ADDITIONAL USAGE:

The AT2102 can also be used to measure the temperature of a baby-bottle or bath

(by using the Surface Temp Mode), or room temperature (by using the Room Mode).

VII. INSTRUCTIONS

1. Install batteries (2-AAA Alkaline).

2. For the first use, or when inserting new batteries, wait from 10~15 minutes for the

warm-up of the unit. This will allow the unit to become acclimated to the

temperature of the room.

3. Press the "On/Scan" button, aim towards the forehead from a distance of

3cm~5cm, and press the "On/Scan" button again to begin the scanning process; the

temperature is displayed in 1 second.

4. Before taking the temperature, make sure to remove hair and perspiration from

the forehead.

VIII. SETTING AND FUNCTION OF MENU

MODE

ºC/ºF

1. Switch on the device

To power-on the device, press the "On/Scan" button for one second. The device

will enter the standby mode showing "---°C" or "----°F" on the screen.

By pressing the "On/Scan" button again, you will get the measuring result in 1

second.

Buzzer

MEM

On/Scan Button