AccuMed CMS-50D Podręcznik - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt medyczny AccuMed CMS-50D. AccuMed CMS-50D 14 stron. Fingertip pulse oximeter
Również dla AccuMed CMS-50D: Podręcznik użytkownika (2 strony)
Drukuj stronę1. Safety
1.1 Instructions for safe operations
Check the main unit and all accessories periodically to make sure that there is no visible
damage that may affect patient's safety and monitoring performance. It is recommended that
the device should be inspected once a week at least. Please stop using the monitor when there is
obvious damage.
Necessary maintenance must be performed by qualified service engineers ONLY. Users are not
permitted to maintain it by themselves.
The oximeter cannot be used together with devices not specified in User's Manual. Please use
the devices recommend by Manufacturer.
1.2 Warnings
Explosive hazard—DO NOT use the oximeter in environment with inflammable gas such as
some ignitable anesthetic agents.
DO NOT use the oximeter while the testee is under measurement of MRI and CT.
Be cautious of the hanging rope, please do not break the hanging rope during usage to avoid
device damage. Please don't use hanging rope if allergic to hanging rope.
Please don't use this product if allergic to rubber cushion.
Please dispose the device, accessory and packing (including plastic bag, foam and carton)
according to local law.
1.3 Attentions
Keep the oximeter away from dust, vibration, corrosive substances, explosive materials, high
temperature and moisture.
If the oximeter gets wet, please stop using.
When it is carried from cold environment to warm and humid environment, please not use it
immediately.
DO NOT operate keys on front panel with sharp materials.
High temperature or high pressure steam disinfection of the oximeter is not permitted. Refer to
User's Manual for instructions of cleaning and disinfection.
Do not have the oximeter immerged in liquid. When it needs cleaning, please wipe its surface
with disinfect solution by soft material. Do not spray any liquid on the device directly.
When cleaning the device with water, the temperature should be less than 60℃.
2. Overview
The pulse oxygen saturation is the percentage of HbO
in the total Hb in the blood, so-called the O
2
1
2