Axminster Trade 106005 Oryginalna instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Oryginalna instrukcja obsługi dla Sander Axminster Trade 106005. Axminster Trade 106005 16 stron. Oscillating sander

Drukuj stronę

MOUNTING SPINDLE DRUM

1.
Disconnect the sander from the power source.
2. Select the proper diameter of spindle drum.
3. Clean the taper part of the spindle drum before mounting it into the spindle.
4. Use an open-end wrench to lock the spindle by holding its flat surface. At the same time, use
another open-end wrench to tighten the spindle drum.
5. Do not over tighten the spindle drum or it will be causing removable problem.
△
WARNING!
!
Disconnect the power source before removing the drum.
6