ALPHAFIT CORE CABLE CELL Instrukcja montażu - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Domowa siłownia ALPHAFIT CORE CABLE CELL. ALPHAFIT CORE CABLE CELL 7 stron.

2 | WEIGHT STACK ASSEMBLY

STEP 2C: SECURE WEIGHT STACK RODS

Reinstall stainless steel cover plate and rod holding block. Reinstall fasteners into underside of top frame as shown.

Install weight stack labels onto weight plates with 2.5kg on the top plate down to 75kg on the bottom plate.

STEP 2D: ROUTE CABLE

Remove all fittings from cable attachment end, leaving adjustment bolt attached to the opposite cable end.

Install bolt into underside of trolley, then start routing the cable from the trolley end through the pulleys as shown.

Once the cable is threaded reinstall fittings on cable attachment end. Tighten cable as required using adjustment bolt.

Ensure top plate is not lifting when properly tensioned.