Axon Body 2 Skrócona instrukcja obsługi
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Aparat cyfrowy Axon Body 2. Axon Body 2 2 stron.
Również dla Axon Body 2: Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik szybkich wskazówek (6 strony)
Drukuj stronę
Axon Body 2 Quick Start Guide
English
Camera Lens
Microphone
Battery LED
Green = 40% - 100%
Yellow = 20% - 39%
Red = Less Than 20%
Speaker
Front View
Read, understand, and follow all current instructions, warnings, and relevant Axon training materials before using any Axon system. The
most up-to-date warnings and instructions are available at www.axon.com.
Before using an Axon Body 2 camera, ensure it is fully charged and properly configured.
Recording
The Axon Body 2 camera has 2 operating modes - BUFFERING and
EVENT modes. BUFFERING mode provides pre-event buffering to
capture activities that occur before you activate the EVENT mode.
EVENT (also known as Recording) mode is for recording.
1. Turn the system on. Move the Power Switch to the On position (the
red area under the switch is exposed when the switch is in the On
position).
• The camera takes a few seconds to boot up and be ready to record.
• The operation LED will be solid red and then transition to blinking
green when the system goes into BUFFERING mode.
• The Axon Body 2 camera enters BUFFERING mode after the boot
up sequence. With default settings, BUFFERING mode holds
the previous 30 seconds of video (NO AUDIO) leading up to the
beginning of a recording.
2. To record, quickly double-press the EVENT button.
• The camera now records audio as well as video.
• The camera beeps twice to let you know that recording has started.
The two beeps will repeat every 2 minutes (audio notifications
can be deactivated if necessary).
• The operation LED will blink red.
EVENT Button
3. To add a marker to the video, quickly press and release the Function
button.
4. To stop audio recording (mute), press and hold the Function button
for three seconds.
5. To stop all recording and return to BUFFERING mode, press and
hold the EVENT button for at least 3 seconds, until there is a long,
audible beep.
With default settings, the system does not capture audio in
BUFFERING mode, so anything recorded in that mode will be video-
only. BUFFERING mode starts only after the camera is turned on. The
system does not record when the Axon Body 2 camera is turned off.
Quick Reference
Power Switch
Red = On/Buffering
Function Button
Mute or add marker
EVENT Button
Double Tap = Start Record
Hold 3 Sec = Stop Record
Battery Status Button
Push to show battery status
Solid Red
Blinking Green
Boot Up Mode
BUFFERING Mode
Blinking Red - EVENT Mode
Function LED
Operation LED
Connection Socket
Data Transfer and Recharging
through Axon Dock or PC
Top View
Operation LED
The Axon Body 2 camera's operation LED displays the current
operating mode.
Operating Mode
Recording OR
Recovering interrupted video*
Buffering
Booting up/powering down OR
Error state**
*When the Function LED also is blinking red.
**When the Function LED also is solid red.
Function LED
The Axon Body 2 camera's function LED displays when certain
functions are enabled.
Function Enabled
Mute (no audio capture)
Camera error *
Bluetooth feature is booting up
*Use the power switch to turn the camera off and on.
Battery LED in the field
In the field, the battery LED can display the battery's remaining capacity
and the camera's current operating mode.
Battery Capacity or Function
Battery capacity is 40–100%*
Battery capacity is 20–39%*
Battery capacity is less than 20%*
BUFFERING mode**
EVENT mode**
* When the Battery Status button is pressed
** When configured to mirror Operation LED
Battery LED in an Axon Dock
When the Axon Body 2 camera is in an Axon Dock, the battery LED
displays the battery's charge status.
Battery Charge
Fully charged (capacity greater than 98%)
Charging in progess (capacity 20 to 98%)
Charging in progress (capacity less than 20%)
Status LED
Bottom View
Operation LED
Blinking red
Blinking green
Solid red
Function LED
Blinking blue
Solid red
Solid blue
Battery LED
Green
Yellow
Red
Blinking green
Blinking red
Battery LED
Green
Yellow
Red