Alphasonik APP122 Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Subwoofer Alphasonik APP122. Alphasonik APP122 16 stron.

If you observe that the protection LED is lit, please check the system carefully to

determine what has caused the protection circuit to engage. The amplifier shut down due

to a thermal overload condition, please allow it to cool down before restarting. If the

amplifier shut down because of an input overload or short circuit, be sure to repair these

conditions before attempting to power up the amplifier again.

Do not use the equipment unmounted. Do not mount the system so that wire

connections are unprotected or are subjected to pinching or damage from nearby

objects. Confirm that your source unit and other equipment are turned off while making

connections. If you need to replace the power fuse, replace it only with a fuse

identical to the provided fuse. Using a fuse of different type or rating may result in

damage to the system, which is not covered by the manufacturer's warranty. Do not

install any product where it may be subjected to excessive heat, moisture and dust or

where it may be repeatedly kicked, brushed or bumped. Make absolutely sure that

the terminals for the products are connected to the proper inputs and outputs from the

audio source.

Specifications are subject to change without notice.

For the most updated Specifications check the Alphasonik

Disclaimer

website. www.alphasonik.com

Warning And Disclaimer