Cineo Edge 160 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oprawa oświetleniowa Cineo Edge 160. Cineo Edge 160 16 stron.

System Components, Connections and Controls

Components

All Lightblade Edge configurations feature these characteristics:

The Lightblade Edge system essentially includes four different components that can be combined or

used individually to create optimized lighting fixtures and systems. These are:

1. Lightblade Lampheads

Linear LED soft light sources, supporting five LED channels: R, G, B, 2700K, 6500K. They are available in

both 24" (61 cm) and 48" (122 cm) lengths. Lightblade lampheads connect exclusively to Lightblade

Controllers via 10-wire RJ50 cables.

2. Lightblade Controllers

Lightblade Controllers are designed to provide both power and control to their attached Lightblade

lamphead. Each Lightblade Controller connects to a single Lightblade lamphead. Connections include

AC power and DMX/RDM. Local control is also provided. A secure 3/8-16 threaded mounting hole is

provided for attaching to standard grip equipment.

3. Power Chassis

The Lightblade Power Chassis is a convenient way to mount, power and control banks of Lightblades.

These come in two configurations: 2-Blade and 4-Blade. Power Chassis can accommodate both 2' or 4'

Blades. The Power Chassis provides a power switch for the entire fixture, AC distribution to all attached

Lightblades and a RJ45-to-5-pin XLR passive adapter for DMX. For convenience, the Power Chassis also

includes carrying handles and additional mounting options.

4. Additional mounting equipment

In addition to mounting a Lighblade fixture with the included 5/8" baby pin, a QuikClik mounting clip

is available for mounting individual blades separate from the controller. The Power Chassis can be

mounted with the included baby pin, or can be used with a twist-on Omnimount plate.

Power Connections

The individual Lightblade Edge units are powered by a 110 – 240VAC power supply, internal to the

controller. Typical power connection is via the attached IEC pigtail. Alternatively, the controller can be

hard-wired using the power bus connectors, which are accessed by removing the safety power cover.

The Lightblade Edge fixtures can be configured into multi-blade fixtures using the Lightblade Power

Chassis, which are available in 2-Blade and 4-Blade configurations. These power chassis provide mounting

support, AC power distribution and switching, as well as convenient DMX connections in standard 5-pin

XLR connectors.

NOTES:

1. Ensure the power cable is disconnected before servicing.

2. Do not connect to a variable supply, such as a dimmer rack.

3. A self-resetting thermal breaker is located within the individual Lightblade controllers. The Power

Chassis also includes a fuse in the switch/IEC connector module.