CineRAID CR-H232 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przechowywanie CineRAID CR-H232. CineRAID CR-H232 8 stron. 2bay dual sata drive dock/stand-alone duplicator

Drukuj stronę

· Connect the power adapter to the enclosure and power

up the docking station.

·The computer should now detect the new hardware. For

Windows2000/XP/VISTA/7/8,

necessary.

Please proceed to step 6.0 to format your drive.

Duplicator Mode

·Install 2 hard drives into the docks. Make sure to place the

drive with the data you want copied (Source) into the

"Source" bay. The target disk (Target) should be equal or

larger in capacity than the source disk.

· Connect the power adapter to the enclosure and press the

POWER button to power up the docking station.

· After about 10 seconds, hold the CLONE button for around

5 seconds to begin duplication. Clone Status indicator

(25%,50%,75% and 100%; 4 status total) should be active.

Shown as below:

driver

LED Status

setup