Alphasonik PBAT10E Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Obudowa Alphasonik PBAT10E. Alphasonik PBAT10E 16 stron. 10” amplified vented bass enclosure

cutting. Take care when you work near the gas tank, gas lines, hydraulic

lines, electrical components and electrical wiring. Do not use the equipment

unmounted. Attach this system securely to prevent damage, particularly in

the event of an accident or aggressive driving. Do not mount the system so

that wire connections are unprotected or are subjected to pinching or damage

from nearby objects. Before connecting or disconnecting power connections

at the system power terminals, disconnect the +12V DC wire at the battery

end. Confirm that your source unit and other equipment are turned off while

connecting the input terminals. If you need to replace the power fuse, replace

it only with a fuse identical to the provided fuse. Using a fuse of different type

or rating may result in damage to the system, which is not covered by the

manufacturer's warranty. Do not install any product where it may be subject-

ed to excessive heat, moisture and dust or where it may be repeatedly kicked,

brushed or bumped. Make absolutely sure that the terminals for the products

are connected to the proper inputs and outputs from the music source. Never

run the wiring on the outside of the vehicle or under it where it can be dam-

aged by road hazards or any moving parts of the vehicle. Use existing wire

channels, sills, panels and molding strips inside the vehicle to hide the wiring

for safety and a neat appearance.

vehicle's safety or structural support system. If you are unsure, it is best to

have the product professionally installed by an Authorized Alphasonik Dealer.

Never sacrifice your safety for sound.

Investigate the layout of your vehicle thoroughly before drilling or

DISCLAIMER

IMPORTANT: Never cut any metal that is an integral part of the