Alphatech BlueGate SIP Instrukcja szybkiej instalacji - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Gateway Alphatech BlueGate SIP. Alphatech BlueGate SIP 19 stron. Voip gsm gate

Permited calls

Up to 12 blocks of permitted calls can be selected in each GSM module.

The table of the permitted calls is accessible after clicking on the Accepted

calls. If the table is not filled in, all calls are enabled. 1- up to 8-digit

numbers can be written in the first column of the table. The program

substitutes any digits instead of not filled in digits from the right which

checking the enabled calls. This means, instead of writing the numbers

601,602,...609, it is possible to write only 60. If the operator has three

successive numbers differing from each other only by the last digit, this

calls can be written as a group on a single line: the first column contains up

to 8-digit number of the first call ("from") as in the case mentioned above

and the last digit of the last call is stored in the second column (i.e. the last

digit of "to"). A group may be created only within the range of one order of

the last position - i.e. from 0 to 9! By proper filling in the tables of both

modules (one module e.g. T-Mobile code, the other module Orange code),

it is possible to achieve automatic re-routing of the outgoing call in the

module allowing cheaper calling through the given operator (LCR).