AccuPower IQ-328 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka AccuPower IQ-328. AccuPower IQ-328 9 stron. Intelligent fast charger
Drukuj stronę
Note: It can take several days to complete this process. It always depends to the
selected discharge current. The maximum discharge current is 500mA.
TEST MODE "TEST"
With this mode, you can check, analyze the present capacity of your batteries.
The battery charger will fully charge the batteries at first, then the batteries are fully
discharged and charged again finally. The display will show the capacity of the battery.
By long hold the MODE button, then select the "TEST ". Then set the CURRENT button
the charging current. (see table below)
Discharge and charging Current chart
Ladestrom im Testmodus /
Gewählter Ladestrom
User-selected Charging current
Anschließender Entladestrom
Thereafter Discharging current
Note: Once the test mode is completed, the display shows "Full" and the battery
capacity in mAh or Ah. By pressing the DISPLAY button to shown other data. The
maximum charging Current is 1000mA. The discharge current is always half of the set
charging current.
SERVICE & MAINTENANCE:
The battery charger is maintenance free, but should be cleaned occasionally. When
cleaning the unit must be disconnected from power. Only dry and soft cloth. Under no
circumstances use abrasive cleaners or solvents.
Technical data:
Input voltage for AC / DC adapter: 100-240 VAC 50-60 Hz
charging current range: 200mA - 1800mA
Maximum charging capacity (capacity of battery): ≤ 3500 mAh
Dimensions (L x W x H) of the charger approx: 130 x 83 x 35 mm
7/8
C
harging Current TEST MODE
200 mA
100 mA
Testmodus
Test mode
Ladestrom 200 mA
Charging current: 200 mA
Testmodus
Test mode
Die Akkukapazität (in mAh oder Ah) wird angezeigt, nachdem der Testmodus
abgeschlossen ist.
Battery capacity displayed (in mAh or Ah) as the checking is finished in Test
mode.
500 mA
700 mA
250 mA
350 mA
1000 mA
500 mA