Alphatron PEDESTRAL Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer Alphatron PEDESTRAL. Alphatron PEDESTRAL 7 stron.

4. MOUNTING THE VIDEO CAMERA

- Be sure that vertical movement-locking knob (8) is tight and the wheels are locked (27, 28).

- Place the Pedestal on a stable and flat floor.

- Mount your camera Head on the 100mm bowl. When using a 75mm Head an 100/75 adapting

plate is available from your Alphatron supplier.

- Mount the camera to the Head using the integrated quick lock system. Apply all appropriate

accessories to the camera up to the maximum of 20kg total load (camera, head & accessories

together).

- If necessary use the Pump (18) to increase pressure to the air system or use the Set Knob (25)

to decrease the pressure. Use the complete vertical stroke of the Pedestal Column to test what is

the ideal situation.

- If too much air pressure is applied the safety valve (24) will open and an unknown amount of air

will escape from the system to prevent it from being overloaded.

5. CABLE GUARDS (OPTIONAL)

The 125 mm low friction swivel wheels can optionally be equipped with cable guards

according to the following mounting instructions.

1. 125 mm Swivel Wheel

with double brake

2. Washer 25 mm

3. Cable Guard

4. Washer 16 mm (2x)

5. Knob M8

6. Locking Plate

7. Hexagon Bolt M8x65

- Remove the Bolt and

Nut from the 125 mm

wheel using the supplied

tools

- Take the new hexagon

Bolt, Locking Plat and

small washer and put

them through the

Bracket and Wheel.

- Then Position the Cable Guard (3) around the M8 wheel (5) and put the larger washer 25mm

(2), the Cable Guard, a small Washer (4) and the Knob on the Hexagon Bolt (7)

- Be sure that the locking plate (6) is put right to prevent the Bolt from turning when the Cable

Guard is in place.

- Apply the same actions to the other wheels

The Cable Guard now is mounted and adjustable by the Knob, shifting it vertically, depending on

the use of the Pedestal.