ARC Audio KS125.2 MINI Instrukcja instalacji - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wzmacniacz ARC Audio KS125.2 MINI. ARC Audio KS125.2 MINI 17 stron. Moto series

Step 6-

Installing the Speakers

If you are only installing speakers please first read

Step 4 of this manual for instruction to remove the

fairing. Then disconnect the factory speaker leads and

proceed to step 6A.

A. Remove the (3) T25 torx screws that hold the factory

speaker, spacer and grille in place. (See Figure 6A and

6B)

--If installing Coaxial Speakers skip ahead to Step 6F--

C. Carefully position your hole saw in chosen location

on the inner fairing for the seperate tweeters. Then

drill your tweeter openings.

D. Using the provided hardware that comes in the

speaker kit mount the tweeter's/mounting cups to the

openings in the inner fairings using the ribbed circular

locking collars. Make sure to press firmly to ensure

that the mounting is safe and secure.

E. Mount and wire the crossovers accordingly to the

markings on the case. Mount the crossovers to the inner

side walls of the fairing with velcro provided in the

wiring kit.

F. Next place the new speaker onto the spacer taking

special attention to rotating the speaker so the termi-

nals face to the inside of the bike so the speaker ter-

minals don't short out on the metal fairing support

brackets. (See Figure 6E)

Connect the speaker leads to the newley mounted

speakers and route the wires neatly to the respected

channels of the amplifier securing them to surrounding

harness's with the provided zip ties. (See Figure 6F)

Speaker Installation

Figure 6A-

Figure 6B-

Figure 6C-

Figure 6D-

Figure 6E-

Figure 6F-