Cino CN-KA Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ekspres do kawy Cino CN-KA. Cino CN-KA 6 stron.

2.KB

Volume selector

30ml

50ml

70ml

100ml

120ml

150ml

200ml

Machine heating up: brewing indicators will blink at 1Hz, power indicators will

always be on, one of volume indicators will always be on, preheating time 45s.

After heating up, the machine goes into standby mode.

Stanby mode : indicators of brewing and volume will always be on.

If you open the handle in the Pre-heat mode, the temperature can't be selected.

WiFi instructions (Option)

When WiFi indicator is ON, WiFi connection is successful; When WiFi

indicator blinks, WiFi connection is not successful. To erase WiFi

connection record: turn volume switch to 7 ( max volume ), turn

temperature switch at red, open the handle, press brewing button twice,

then power off and restart the machine.

Temperature selector

Blue light: ambient

temperature

Green

light：40-45℃

Yellow

light：70-75℃

Orange

light：80-85℃

Red

light：90-95℃

Operating instructions

1.Preparation before use

1. Plug in the power cable

2. Add water and place water tank in correct position.

3. Place the cup

4. Press Power Button

(CN-KA You will hear a"beep"when the machine starts preheating.）

(CN-KB The Indicators of volume and temperature that you select will always be ON.）

5.(CN-KA Press the volume button to run a cup of water）

(CN-KB Press brew key to run a cup of water ）

Do not add hot water in water tank, Hot water may crack the tank, or cause electric shock.

Please notice the maximum and minimum water level.

1. Brewing coffee