Arc Euro Trade SC3 Instrukcja demontażu i ponownego montażu - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja demontażu i ponownego montażu dla Tokarka Arc Euro Trade SC3. Arc Euro Trade SC3 17 stron.

163. Temporarily fit top slide to compound base

162. Fit compound base to cross slide.

164. Oil top slide assembly and fit.

and check for clearance in corners of dovetail.

165. Fit gib strip and adjusting screws making sure they engage in the gib strip dimples.

166. Adjust the screws so the slide will move back and forth easily by hand.

167. Oil / grease feed screw and fit. Oil / grease end of feed screw and bracket and fit.

168. Turn the feed screw to check it turns freely.

169. Assemble and fit the micrometer dial and friction clip to feed screw.

170. Fit the spacer and handle and wind the slide back and forth.

171. Measure backlash with a feeler gauge.

- 16 -