Cino Micro2 Series Skrócona instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarka Cino Micro2 Series. Cino Micro2 Series 13 stron.
Drukuj stronęWarning and Error Messages
LED1
LED2
Orange
Green
Start blinking after steady on for 10 seconds
Orange
Green
Start blinking after steady on for 10 seconds
Orange
Green
Start blinking after steady on for 10 seconds
Orange
Green
Start blinking after steady on for 0.5 seconds
Orange
Orange
Start blinking after steady on for 10 seconds
Orange
Red
Start blinking after steady on for 10 seconds
Orange
Orange
Start blinking after steady on for 10 seconds
Orange
Orange
Start blinking after steady on for 10 seconds
Red
Red
Start blinking after steady on for 10 seconds
(*) Please refer to the following resolutions.
1. Paper Jam:
Open the media compartment cover and reload the media roll.
2. Label Length Measurement Error:
Check whether the sensor type and media type are correct.
Re-conduct paper length measurement.
3. Media Compartment Cover Opened:
Close the media compartment cover.
4. No Paper:
Load the media roll.
5. Command error:
Reset Micro2.
Resend a correct command.
6. Print Head or Motor Overcooled:
The printer will automatically resume operation after the print head or
motor comes to the normal temperature.
7. Print Head or Motor overheated:
The printer will automatically resume operation after the print head or
motor cools down to the normal temperature.
8. Print Head Broken:
Call a qualified service technician to replace the print head.
LED3
LED4
Green
Green
Green
Green
Orange
Orange
Red
Description
Paper jam (*1), or
Label length measurement error (*2)
Media compartment cover opened (*3)
No Paper (*4)
Command Error (*5)
Motor over cooled (*6)
Motor over heated (*7)
Print head overcooled (*6)
Print head overheated (*7)
Print head broken (*8)
8