Arc-Zone Piranha 3 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System spawania Arc-Zone Piranha 3. Arc-Zone Piranha 3 11 stron. Heavy-duty tungsten grinder

Approximate Electrode Grinding Time:

.040" (1.0mm)

1/16" (1.6mm)

3/32" (2.4mm)

1/8"

(3.2mm)

5/32" (4.0mm)

3/16" (4.8mm)

Note: Silicone carbide wheels will contaminate the tungsten and should not be used.

Total electrode length is critical to high-quality automated, orbital and fixture mounted

welding operations. Please refer to your equipment manufacturers specifications to

ensure consistent performance.

NOTCHING YOUR ELECTRODE

The notching feature is located at the right hand side of your unit. This feature is

provided to notch your electrodes so they can be re-sized, or to remove the

contaminated portion of a spent electrode.

Never snap your electrode without notching it first, as this will cause splintering which

can result in contamination of your weld.

Insert your electrode through one of the two openings

and push through so the electrode exits from the

opposite opening. Hold both ends and push the

electrode towards the corner of the rotating wheel.

Once you have notched enough of your electrode on

one side, rotate the electrode to notch the other side.

Use the Tip/Flat Block to flatten the end of your

electrode and proceed to grind as normal.

^o`JwlkbK`ljI=fåÅ.

qÉäW=TSMKVPNKNRMM

==UMMKVQQKOOQP

5 to 10 seconds

10 to 15 seconds

20 to 30 seconds

45 to 60 seconds

70 to 90 seconds

100 to 130 seconds

==OMVN=i~ë=m~äã~ë=aêáîÉ=píÉK=`

==c~ñW=TSMKVPNKNRMQ

ïïïK~êÅJòçåÉKÅçã=

NJUMMJVQQJOOQP=

ïïïK~êÅJòçåÉKÅçã=

máê~åÜ~=fff=léÉê~íáçåë=j~åì~äW=m~ÖÉ=T=

==`~êäëÄ~ÇI=`^==VOMNNJNRRN=

==bJj~áäW=áåÑç]~êÅJòçåÉKÅçã==