Axor Citterio 39148XX1 Instrukcja instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie wnętrz Axor Citterio 39148XX1. Axor Citterio 39148XX1 8 stron. Faucet
Również dla Axor Citterio 39148XX1: Arkusz specyfikacji (1 strony)
Drukuj stronęAxor Citterio Wall Mount Lav Mixer with Cross Handles
39144XX1
Axor Citterio Wall Mount Lav Mixer with Lever Handles
39148XX1
39144XX1
Technical Data
Flow rate @ 45 psi
Maximum water pressure
Recommended water pressure:
Recommended hot water temp.:
*Some municipalities limit the maximum water temperature from the water heater to
120
or below. Please know and follow all applicable local codes when setting the
o
temperature on the water heater.
Installation Consideration
Rough-in 10303181 must be installed, and the wall finished, prior to
installation of this trim kit.
For the trim to fit properly, the outside surface of the finished wall must fall
between the "minimum" and "maximum" lines on the factory installed plaster
shields on the rough-in. If the rough-in is too far inside the wall, install
extension kit 96259000 (purchased separately) before attempting to install
the handle trim.
No drain is included with this trim kit. Please consult the sink manufacturer
regarding a suitable drain for the specific sink used.
39148XX1
2.2 gpm
145 psi
14.5 - 75 psi
120
F - 140
F*
o
o