Ciontek CS10 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Terminale dotykowe Ciontek CS10. Ciontek CS10 5 stron. Smart pos payment terminal

Cautions:

1. Strictly observe the following instructions while install and connect the device. Connect to

stable power socket, try to avoid charging it together with high‐power machines like

air‐conditioner.

2. Please try not to use the device during thunderstorm in case of lightening stroke, and power

off as well as cut off its connection to host machine.

3. This is electrical product, be sure not let anything like pin, thumbtack, wire or water slip into

the device, or short circuit will be caused to destroy device.

4. Be sure no heavy pressure on device or place anything on it.

5. Prevent fierce vibration, strike or beat.

6. Ensure good working condition, never use it in humid, high temperature, sun burn, dustiness

or frost environment, never get close to strong electromagnetic field, never use device under

flammable and explosive conditions.

7. Avoid plug or swap any part or peripherals when power is on, or it may cause inner hardware

damage. Shutoff device before cut power.

8. This device is integrated with Lithium battery, change our original battery if needed. Other

types battery may cause damage to device. Contact us or our distributor when you need to

change battery.

9. Cut off power and stop operation if device break down. DO NOT disassemble device yourself.

10. Avoid sleet, solar exposure, mechanical shock or extrusion. Be careful when delivering.

11. Device should be kept in original package, temperature of warehouse should be －20℃～

60℃,relative humidity should be 5%～95%.No noxious gas, flammable, explosive or mordant

chemicals are allowed to be together, ensure no mechanical shock, impact or high magnetic

surroundings. Package should be 15cm above floor at least, 50cm against wall, heat source, cold

source, windows or air inlet.

12.This device complies with part 15 of the FCC Rules. Operation is subject to the condition that

this device does not cause harmful interference

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

‐‐ Reorient or relocate the receiving antenna.

‐‐ Increase the separation between the equipment and receiver.

‐‐ Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

‐‐ Consult the dealer or an experienced radio/TV technician for help.