Arca-Swiss Monoball Skrócona instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Akcesoria do kamer Arca-Swiss Monoball. Arca-Swiss Monoball 4 stron.

Release clamp. Please test all camera and lens plates made by

manufacturers other than ARCA-SWISS to ensure compatibility.

Maintenance

Your Monoball® needs no lubrication and will serve you trouble-free

under normal conditions for many years. Nevertheless your Monoball is

a precision instrument and you must treat your Monoball accordingly.

If the monoball is not moving smoothly, clean the ball with a soft cloth

and alcohol. However: Make sure that sand or dirt never enters the

housing. Never use any lubricants as lubricants will damage

your Monoball®.

Trouble-Solving

1.)

Trouble:

Solution:

2.)

Trouble:

Solution:

4.)

Trouble:

Solution:

This ARCA-SWISS product is covered by U.S. Patent

#5,249,766 and many others.

The Multifunction knob or thumbscrew is locked.

Always tighten the mutifunction knob first by turning

it clockwise and only then loosen the thumbscrew.

Ball is "frozen" in place.

Increase tension on ball by rotating multifunction

knob clockwise. Release friction by turning

thumbscrew counter clockwise, now release tension

on the ball by rotating the multifunction knob counter

clockwise

Panning is not working smoothly

Check to see if the tripod's locking screws in the

tripod platform are over tightened. If so reduce

pressure on panning base by loosening these screws