Axtell EASY-TALK Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Gra Axtell EASY-TALK. Axtell EASY-TALK 5 stron. Animatronic puppet system

BIRD PERCH ADJUSTMENT

If you purchased the Bird Perch model of the EASY-TALK, you can move the

wooden perch bar to the correct height by slightly loosening the screws on the

back of the wooden bar, then re-tightening in the correct position. You can also

add Velcro as well to the bar and to your bird's feet to keep them secure when

the bird rotates as well.

To power the unit, plug the included wall adapter into the servo controller in the

base of the EASY-TALK using the LEFT hole. The unit will turn on (there is no

on/off switch when using the wall adapter).

If you purchased the optional battery pack, install 4 AA batteries and plug the

pack securely into the battery connector port in the back of the EASY-TALK

base, making sure to orient the plug so that the black wire is on the left side

of the plug and the red wire is on the right as seen in the photo above.

To power on the battery, flip the power switch on the pack to the "on" position.

WARNING: Do NOT power your EASY-TALK with the Wall adapter and

battery pack at the same time or this will damage the unit and void the

warranty. Please disconnect or remove the battery pack when not in

use. If you are using the battery pack, disconnect the wall power

adapter.

POWER INFORMATION