aXtion pro M Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria do tabletów aXtion pro M. aXtion pro M 5 stron.
Również dla aXtion pro M: Instrukcja instalacji (4 strony)
Drukuj stronęWater Stopper
Replacing
Installation
If water-resistant (IP65) is required while charging, replace the blue water stopper with the gray one
by following directions below. Call us to get the Gray Water Stopper.
1
Grasp one side of blue rubber stopper and pull to
remove
3
Pull each of the two rubber fingers through the holes
until they are seated properly
5
Water-resistant
IP65
Installation Guide
* CAUTION: WATER-RESISTANCE WHILE
CHARGING - Removing of the included
charging cable from the GRAY water
stopper will interrupt the water-resistant
feature. We do not recommend constant
removal of the cable to increase the
Hand Strap
longevity of the products and to ensure
proper protection.
Cable is not
included in the
package.
pro M
ご利用ガイド
Charging
@IP65
Water-
resistant*
Blue
2
Align stopper with holes and ensure proper orienta-
tion (refer to photo), apply firm pressure to the
charging port until the stopper sits into place
4
Using a utility knife carefully cut the excess rubber
Gray
Call us to get the Gray Water Stopper.
Top
d1
d2
d1>d2
pro M
Contact us:
(949) 216-8888
Monday through Friday,
9:00 a.m. to 5:00 p.m. ( PST)