AXTON CAC2.6 Instrukcja instalacji - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System głośników AXTON CAC2.6. AXTON CAC2.6 17 stron.

Drukuj stronę

As a general rule of thumb, the -6dB position is is best for tweeters that are mounted very

close to the listener's head, or for tweeters mounted on top of the dash-board and in the

window triangles or A-pillars.

The -3dB position is usually the setting that provides a good tonal balance for most in-

stalls, while the 0dB position leaves you with a slight excess of energy in the treble region.

Attention: The tweeter attennuation switches must both be set to identical position on

both crossovers!

After completing all the available settings for mid/woofer lowpass slope, tweeter attenua-

tion and polarity, you can mount the crossover in place and reinstall all the other panels /

factory grilles a.s.o.

Your installation is now complete and therefore ready, to be checked out.

TESTING THE INSTALLED SYSTEM

Slowly turn up the volume of your head unit, and listen for distorted sounds. If everything

appears to be okay and it just sounds right, check out the speaker balance of the left and

right side by adjusting the balance control of your headunit. Shifting the balance to the left

channel should provide you with sounds coming solely from the left speaker system, while

shifting the balance to the right should do the same for the right speakers. If anything

appears to be wrong, you must recheck the wiring of the x-overs, the amp or the mid/

woofers.

TECHNICAL SPECIFICATIONS

Type (Set)

Nominal Size

Conﬁguration / System

Peak Power Handling

Continuous Power Handling

Crossover Slope LP Mid/Woofer 6/12dB / oct.

Crossover Slope HP Tweeter

Crossover Frequency

Nominal Impedance

Sensitivity

Frequency Response (- 3dB)

Mid Woofer

Basket (EURO-DIN)

Mounting Depth

Mounting Diameter

Tweeter

Overall Diameter

Mounting Height (ﬂat surface)

Mounting Diameter (recessed)

CAC2.5

CAC2.6

Component

5¼" (13 cm)

6½" (16.5 cm)

2-Way

140 W

160 W

100 W RMS

120 W RMS

6/12dB / oct.

12dB / oct.

3500 Hz

4 Ohms

90 dB

91 dB

70 Hz – 25 kHz

60 Hz–25 kHz

5¼" (13 cm)

6½" (16.5 cm)

62 mm

66 mm

118 mm

144 mm

52 mm

31 mm

52 mm

– 13 –

CAC2.5ES

CAC2.6ES

Component

5¼" (13 cm)

6½" (16.5 cm)

2-Way

120 W

140 W

80 W RMS

100 W RMS

6/12dB / oct.

12dB / oct.

3500 Hz

4 Ohms

88 dB

89 dB

70 Hz – 26 kHz 60 Hz–25 kHz

5¼" (13 cm)

6½" (16.5 cm)

46 mm

50 mm

118 mm

144 mm

52 mm

43 mm

31 mm

52 mm