Arcam AVR200 Podręcznik - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik dla Odbiornik Arcam AVR200. Arcam AVR200 19 stron. Surround sound receiver
Również dla Arcam AVR200: Instrukcja serwisowa (15 strony)

Drukuj stronę
Arcam AVR200 Podręcznik

Connecting inputs

AUDIO PRE-OUT
ANTENNA
R
L
(N.AM)10K
AM STEP
(EU) 9K
AM
R
AUDIO
GND
FM
CENTRE
SUB
WOOFER
TAPE
5.1 CH INPUT
R
L
R
L
OUT
IN
SUB
CENTRE
AUDIO
CD
WOOFER

Interconnect cables

The use of high quality interconnect cables to and from your
AVR200 is recommended to ensure the best sound and picture
quality. Ask your Arcam dealer's advice on cable selection.
This product does not feature a Phono input stage. If you wish
to connect a turntable to your AVR200 you will need to use
an in-line phono pre-amp. All line level inputs have the same
sensitivity so may be used with any line level source equipment,
even components other than those labelled. If you need to do
so, your Arcam dealer can give you further advice on this.
CD input
Use audio interconnects to attach the left and right audio
outputs from your CD player to the
If your CD player has digital output, connect it to the
socket on the AVR200.
IN
TAPE loop
This input can be used to connect one of many different
recording devices, for example, a tape deck, Mini-Disc or CD-R.
Use audio interconnects to attach the left and right audio
outputs from your recorder to the corresponding
the AVR200. If your tape source has digital output, connect it to
the
TAPE DIGITAL IN
To complete the record loop, attach the left and right
outputs from the AVR200 to the corresponding record inputs
on your recorder.
5.1 channel input
This multi-channel input takes up to six (i.e. fi ve channels plus
one sub-woofer) discrete channels of audio from a DVD audio
player or a DVD player with an integrated decoder. Use audio
interconnects to attach the DVD's outputs to the appropriate
CH INPUT
For optimum performance from DVD video, however, it is usually
better to use a digital connection to the AVR200's own internal
digital surround decoder instead.
SAT input
Use audio interconnects to attach the left and right audio
outputs from your satellite or cable receiver (or digibox) to the
corresponding
MONITOR OUT
S-VIDEO
VIDEO
+
L
OUT
LOUDSPEAKER
OUTPUTS
AUX
IN
–
IN
AUX
OUT
VCR
AUX
IN
IN
DVD
12V
TRIGGER
OUT
IN
SAT
VIDEO
S-VIDEO
inputs on the AVR200.
CD IN
socket on the AVR200.
inputs on the AVR200.
inputs on the AVR200.
SAT
FRONT
CENTRE
SURROUND
R
L
R
L
+
–
DIGITAL IN
DIGITAL
OUT
TAPE
DVD
SAT
CD
REMOTE
SPEAKER
CONTROL
IMPEDANCE
INPUT
SELECTOR
4–6Ω
8Ω
Using either the composite or the S-video output from your
satellite receiver, connect it to the corresponding
S-VIDEO
If your satellite receiver provides a coaxial digital output, attach
it via the
DVD input
In most cases you will achieve the best audio performance
from your DVD player by connecting its digital output to the
digital input of the AVR200, using a suitable 75Ω digital
DVD
cable. Connect either the composite or S-video output from your
DVD player to the corresponding
the AVR200.
If you are also using your DVD player to play CDs and prefer to
use the stereo audio outputs, connect these to the
CD DIGITAL
of the AVR200.
VCR loop
Use audio interconnects to attach the left and right audio
outputs from your video cassette recorder to the
on the AVR200. For the video signal, use either the composite
or the S-video output from your VCR and attach to the
inputs on
TAPE
corresponding input on the AVR200. If the VCR has a digital
output, connect it to the
To complete the record loop, attach the left and right
TAPE
outputs from the AVR200 to the corresponding record inputs on
your VCR. Using the same type of video connection as for the
input, connect the
corresponding input on your VCR.
AUX input and record loop
Use audio interconnects to attach the left and right audio
outputs from your auxiliary source (another item of audio
5.1
equipment or a games console) to the corresponding
inputs on the AVR200.
Using either the composite or the S-video output from your
auxiliary source, connect it to the corresponding
S-VIDEO
If your auxiliary source has a digital output, connect it to the
digital input on the AVR200.
120V
230V
input on the AVR200.
digital input.
SAT
or
VIDEO
digital input on the AVR200.
VCR
picture output from the AVR200 to the
VCR
input of the AVR200.
GROUND
GROUND
LIFT
AC INLET
or
VIDEO
inputs on
S-VIDEO
inputs
CD
inputs
VCR
VCR audio
AUX
or
VIDEO
AUX
AVR200
5