Axus AXP2L Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klawiatura Axus AXP2L. Axus AXP2L 8 stron. Light up portable electronic keyboard

Drukuj stronę

II. Preparation before Playing

• AC/DC Power Adaptor

A dedicated AC/DC power adaptor shall be used. Connect the output end of the adaptor to

the power port on the rear panel of the keyboard, and then the other end to the power socket.

(Note: The input voltage of the adaptor shall be compatible with the power supply voltage)

• Audio Output

External Headphone

♦

Audio output: firstly, turn off the keyboard and the external audio devices, secondly,

connect one end of the audio cable to the PHONES/OUTPUT port on the rear panel of the

keyboard, and then connect the other end to the audio input port of the audio device.

♦

Headphone connection: When connecting a headphone to the PHONES/OUTPUT port

on the rear panel of the keyboard, the loudspeaker will be disabled automatically. In this way,

you can play the keyboard without disturbing others.

Note! When using headphone, do not turn up and keep the volume to the maximum for a

long time, for which may cause hearing loss.

0 Mic Input and Audio Input

♦ Mic input: connect a microphone to the MIC port, and then you can sing while playing

the keyboard.

♦

With the stereo input function, sound signals from mobile phone, MP3 player, computer

and other audio devices can be input into the keyboard system for playing. Firstly turn off the

Keyboard, then, connect one end of audio cable to the output port of an audio device, and the

other end to the AUDIO INPUT port on the rear panel of the Keyboard, finally, turn on the

keyboard.

0 MIDI Interface

The keyboard is provided with USS-MIDI interface, which can be used for connection with

mobile phone and laptop. Firstly, down load APP training software, and connect the keyboard

with the intelligent equipment, which may facilitate training and learning.

Connection method:

The USS-MIDI interface on the keyboard can also be used for connection with music

equipment and computer with MIDI. Melody played with this keyboard can be output to the

computer, and further recording, composing and editing can be realized through computer

and software. In addition, MIDI music stored in the computer can be input to the keyboard for

playing.

Connection Method:

(1) Connect the keyboard and computer with common USS cable, and press the power

ON/OFF button.

(2) Install the music editing software (such as CAKEWALK) in the computer, and launch the

software, and then select MIDI input and output interface in the software.

Ill. Basic Playing Method

Press [Power ON/OFF], LCD screen will turn on and show the current tone, tempo, volume

and other status. The luminous function is enabled by default.

• Key Light

With the luminous keyboard, when under the modes of playing, luminous keyboard three

step training, demo song playing and USS-MIDI music input, the keyboard will light on for

instruction. The luminous function is defaulted to be enabled, press [KEY LIGHT] to enable or

disenable the luminous function.

0 Master Volume Adjustment

Press [Master Vol A] or [Master Vol T] to turn up or turn down the master volume. Press

[Master Vol T] and [Master Vol A] simultaneously to reset your keyboard to the default

values.

The master volume can also control the rhythm volume and the chord volume.

0 Timbre Selection

The keyboard provides 512 timbres, from "000" to "511" for your selection. When starting the

keyboard, the timbre selection function will be activated automatically, and "Tone" will show

on the screen. In the absence of "Tone", Press [TIMBRE] to enable to tone selection function.

The timbre is defaulted to be "000", and it can be adjusted by pressing the corresponding

number buttons or pressing the"+" /"-" buttons.

• Keyboard Percussion

Press [Keyboard Percussion] to activate the percussion function. Under this mode, users can

play the keyboard to produce corresponding percussions. Press this button again to

disenable the keyboard percussion function.

0 Playing Demos

65 demos are stored in the keyboard, from "000" to "064" for your selection. Press [Demo

Song], and the demo song will play in order, and you can press the"+" /"-" buttons to select

other demo.

When playing the songs, you can press the number buttons to select the corresponding

demos, and the selected demos will play in a loop.