ARCBRO Thunder X-PRO Wsparcie serwisowe - Strona 3

Przeglądaj online lub pobierz pdf Wsparcie serwisowe dla Urządzenia przemysłowe ARCBRO Thunder X-PRO. ARCBRO Thunder X-PRO 7 stron. How to set flame cutting - debugging process

Drukuj stronę

Service Support Spirit

Note： The Oxygen pressure is adjusted to below max0.8Mpa; The acetylene pressure is adjusted

to below max0.8Mpa;Document attachment with flame cutting parameter table;

Step 2-2 : Ignition→Adjust the intensity of the flame

Press the 【Ignition】 key on the keyboard;→ Open preheated oxygen and acetylene valves,

Feel gas ejected by hand;→Ignition with a flame igniter

Note：When igniting, the oxygen output gas is too large and the flame is extinguished;

Unique Solution

Control valve on

the machine

Pic3