Digicom GSM Bulk 8D0097 Arkusz danych - Strona 2

Przeglądaj online lub pobierz pdf Arkusz danych dla Modem Digicom GSM Bulk 8D0097. Digicom GSM Bulk 8D0097 2 stron. Dual-band gsm /gprs modem

Drukuj stronę
Finally an embedded application!
Thanks to the technology used inGSM Bulk, it is
possible to build custom applications to satisfy any
particular need.
We can carry out applications working independently
from your device, taking care of the "communication"
part only.
For example, we can send an SMS when a change of
a TTL input is detected or manage a password
exchange without modifying a string in your
application.
Pin-out Technical Features
J5: RS232 [standard]
(male connector 2x7 passo 2,54)
U4: Microphone input [standard]
(male connector 2pin passo 2,54)
U5: Speaker output [standard]
(male connector 2pin passo 2,54)
J7: RS232 [optional]
(male connector 2x25 passo 1,27)
Power Supply
Vcc = 5Vdc ± 10%
Icc = 350mA typ [1700mA max]
For further information: [email protected] or http://www.digicom.it
GSM Bulk
GSM Bulk is suitable for the following
applications:
telemetry;
remote control in energy production
environments;
inside gas, water and electrical energy
distribution rooms;
for the monitoring of ways and railways
(traffic detection, SOS points, etc.) and for
traffic lights remote control;
on-line public informative systems (rotating
advertising messages on ways, motorways,
buses);
image transmission in security applications;
inside POS terminals;
bypass of the last mile through the GSM
network, for telecommunications operators;
inside vending machine and dispensers;
in automotive applications;
PIN J5
PIN J7
SIGNAL
1
--
DCD
2
27
DSR
3
28
4
30
5
25
6
13
7
29
DTR
8
-
RING
9
1-2-6
5Vdc ± 10%
10
3-4
11
-
12
15
On/Off
13
-
14
21-24
(U4) 1
20
Mic ( + )
(U4) 2
-
Mic ( - )
(U5) 1
12
Spk ( + )
(U5) 2
-
Spk ( - )
DIRECTION
ELECTRIC LEVEL
DTE <-- DCE
TTL 0 = Active
DTE <-- DCE
TTL 0 = Active
RxD
DTE <-- DCE
TTL 0 = Space
RTS
DTE --> DCE
TTL 0 = Active
TxD
DTE --> DCE
TTL 0 = Space
CTS
DTE <-- DCE
TTL 0 = Active
DTE --> DCE
TTL 0 = Active
DTE <-- DCE
TTL 0 = Active
Gnd
-
0 Volt
-
5 Volt
-
-
N.C.
DTE --> DCE
TTL 1 = On
TTL 0 = Off
-
-
N.C.
Gnd
-
0 Volt
DTE --> DCE
DTE --> DCE
DTE <-- DCE
DTE <-- DCE