Axxess ASWC-1 Instrukcje

Przeglądaj online lub pobierz pdf Instrukcje dla Akcesoria samochodowe Axxess ASWC-1. Axxess ASWC-1 5 stron. Connections
Również dla Axxess ASWC-1: Podręcznik użytkownika (6 strony), Instrukcje instalacji (4 strony)

Drukuj stronę

Congratulations, your vehicle will be auto-detected by the

ASWC-1.

ASWC-1 Connections

1) Connect the Black wire of the ASWC-1 to chassis ground.

2) Connect the Red wire of the ASWC-1 to a 12-volt accessory wire, one that turns on

and off with the ignition key.

3) Connect the Green/Orange wire of the ASWC-1 to pin 7 of the vehicle. Below is a

picture of what the connector in the vehicle looks like:

This is the pin view of the connector in the vehicle

4) Connect the Black/Green wire of the ASWC-1 to pin 8 of the vehicle.

5) Connect pin 6 of the vehicles harness to chassis ground. You may use the same chassis

ground as the black wire.

6) All other wires on the ASWC-1 please tape up, they will not be used.