Axxess AX Series Instrukcja instalacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe Axxess AX Series. Axxess AX Series 8 stron.

Resetting the AX-TYAMP2-SWC

1. The Blue reset button is located inside the interface, between the two connectors. The button is accessible outside the

interface, no need to open the interface.

2. Press and hold the reset button for two seconds, and then let go to reset the interface.

3. Refer to "Programming the Interface" from this point.

AxxessInterfaces.com

TROUBLESHOOTING

AX-TYAMP2-SWC

I N S TA L L AT I O N I N S T R U C T I O N S

IMPORTANT

If you are having difficulties with the installation of this product,

please call our Tech Support line at 1-800-253-TECH. Before doing

so, look over the instructions a second time, and make sure the

installation was performed exactly as the instructions are stated.

Please have the vehicle apart and ready to perform troubleshooting

steps before calling.

NOWLEDGE IS

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

OWER

REV. 7/24/18 INSTAX-TYAMP2-SWC