Epson 11880 - Stylus Pro Color Inkjet Printer Instrukcja obsługi dla sieci - Strona 28

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla sieci dla Drukarka Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 46 stron. Stylus pro11880
Również dla Epson 11880 - Stylus Pro Color Inkjet Printer: Skrócona instrukcja obsługi (14 strony), Broszura (1 strony), Broszura i specyfikacje (8 strony), Instrukcja rozpakowywania i konfiguracji (28 strony), Podręcznik z informacjami o produkcie (10 strony), Ograniczona gwarancja (12 strony), Broszura i specyfikacje (7 strony), Broszura i specyfikacje (8 strony)

Configuring the Network Interface Using EpsonNet Config with

Web Browser

After you have assigned an IP address to the network interface using the printer's Control

panel, EpsonNet Config for Windows or Macintosh, a DHCP server, or the arp/ping

command, you can configure the network interface using EpsonNet Config with Web

Browser.

Note:

❏ A Web browser must be installed on your computer.

❏ TCP/IP must be correctly set for the computer and the network interface.

Follow the steps below to change the IP address using EpsonNet Config.

1. Turn on your printer.

2. Run EpsonNet Config in one of the following ways.

❏ Run EpsonNet Config for Windows or Macintosh. Select the printer you want to

configure from the list and then click Launch Browser.

❏ Open your browser, and then type in the IP address of the network interface

directly. Do not run EpsonNet Config for Windows or Macintosh.

http://IP address of network interface/

Example: http://192.168.100.201/

Note:

To check the IP address of the network interface, use EpsonNet Config. For details, see

"EpsonNet Config for Windows" on page 25 or "EpsonNet Config for Macintosh" on page 26.

3. Click TCP/IP under Network on the Configuration menu to display the TCP/IP setting

screen.

4. Select a method for acquiring the IP address. When you select Auto, DHCP becomes

available and assigns an IP address automatically. If you want to set the IP address

manually, select Manual.

Note:

❏ The network administrator must check any changes made to the IP address settings.

❏ When Auto is selected, DHCP becomes available. To use the DHCP server, make sure it

is installed on your computer and correctly configured. See your operating system's online

help for detailed instructions.

❏ If Set Using Automatic Private IP Addressing (APIPA) is enabled, a private IP

address is automatically assigned to the network interface even when there are no DHCP

servers on your system or your network.

Network Software