Epson 1280 - Stylus Photo Color Inkjet Printer Podręcznik dla początkujących - Strona 22

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Drukarka Epson 1280 - Stylus Photo Color Inkjet Printer. Epson 1280 - Stylus Photo Color Inkjet Printer 32 stron. Product support bulletin(s)
Również dla Epson 1280 - Stylus Photo Color Inkjet Printer: Wymiana wkładów (2 strony), Biuletyn wsparcia produktu (6 strony), Biuletyn wsparcia produktu (1 strony), Podręcznik uzupełniający (1 strony), Podręcznik użytkownika (27 strony), Podręcznik zgodności (1 strony), Podręcznik uzupełniający (2 strony), Zacznij tutaj (2 strony), Broszura i specyfikacje (2 strony), Informacje o produkcie (13 strony), Podręcznik Start Here (6 strony), Specyfikacje (2 strony), Podręcznik użytkownika (12 strony), Biuletyn wsparcia produktu (3 strony), Biuletyn wsparcia produktu (2 strony), Biuletyn wsparcia produktu (4 strony), Biuletyn wsparcia produktu (7 strony), Instrukcja instalacji (8 strony)

Sawgrass Technologies, Inc.

Tips for Hanes Soft L'Ink

§ The presence of moisture in your fabric can lead to bleeding of the image.

Remove moisture by pre-pressing your shirt for 10 seconds. Use Teflon

sheets between the front and back of the shirt to prevent the inks from

penetrating to the other side of the shirt. If dye residue from your heat press

is being deposited on your shirts at any time, heat press a paper towel or

similar absorbent material to remove residual dye.

§ Using a lint brush before pressing can greatly reduce lint or debris on the

shirt.

Moisture and Humidity Problems

The addition of moisture to the sublimation process can cause unwanted results.

Under normal circumstances, the small amount of moisture that can accumulate in

your paper is absorbed directly into the transfer substrate; however hard substrates

like metal and ceramic are unable to absorb excess moisture. Some of problems

that are attributed to moisture include:

color shifting (colors lose accuracy)

bleeding of the image

uneven transfer of solid filled areas

To avoid these problems

Keep your paper in a dry place.

If you suspect moisture, set the paper on your press for a few seconds. Do not

press it. Just expose it to the warmth. The heat radiating from the press should

help evaporate most of the moisture.

To eliminate moisture in fabric, press the fabric for 10 seconds before doing

the heat transfer.

Use an absorbent cloth or fresh, non-textured paper towel behind the transfer

sheet to absorb the moisture.

SubliJet IQ

Getting Started Guide for the EPSON Stylus Photo 1280

Shirts