7. Slide the tray into the CD/DVD guide. Push in the tray
until the arrows on the tray and the tray guide are aligned,
as shown below.
Designing CDs and DVDs
You can use the Epson Print CD program to create and print a
design with images, graphics, and text. See your User's Guide
or on-screen Reference Guide for instructions.
Printing Your Design
After you have created your design and loaded a CD or DVD,
you're ready to print.
1. Open the File menu and select
2. For Windows, make sure
is selected.
Series
For Macintosh, click the
from the printer list.
Stylus Photo 1400
3. Select
or
CD/DVD
CD/DVD Premium Surface
Media Type setting.
4. Select
as the Print Confirmation Pattern setting
None
(Windows) or Test Print Pattern setting (Macintosh).
5. Click
.
Print
Note: When you set the Copies setting to 2 or more, remove
each CD or DVD from the tray after it has been printed, and then
place the next disc on the tray. Press the
resume printing.
Handle the printed CD or DVD carefully. Allow the ink to
dry at least 24 hours before inserting the disc in a drive. Keep
printed discs away from moisture and direct sunlight.
Note: If printing on a full face (hub-printable) disc, you may need to
adjust the print position to maximize the print area.
If you need to adjust the print position or color, see your
User's Guide or on-screen Reference Guide.
.
Print
EPSON Stylus Photo 1400
button and select
Select Printer
as the
)
paper button to
Direct Printing from a Digital Camera
or Camera Phone
You can connect a digital camera or camera phone that
supports PictBridge or USB DIRECT-PRINT printing to the
Epson Stylus Photo 1400 and use the camera or phone to
control printing of your photos. (A cable may not be included
with your camera or phone.)
Check your camera or phone manual to see if it supports
PictBridge or USB DIRECT-PRINT. If it doesn't, the red
H ink and ) paper lights flash alternately when you connect
your camera or phone. Epson cannot guarantee the
compatibility of any cameras or phones.
The file format of your images must be JPEG, and the size of
each image must be at least 80 × 80 pixels but not more than
9200 × 9200 pixels.
1. Make sure your Epson Stylus Photo 1400 is turned on, but
not printing.
2. Load the type of paper you want to use.
3. Connect the USB cable that came with your camera or
phone to the
PictBridge port on the front of the printer.
4. Connect the other end of the cable to your camera or
phone.
5. Turn on your camera or phone.
6. Use your camera or phone to select the photos you want to
print, adjust any necessary settings, and print your photos.
See your camera or phone manual for details.
1/07
Epson Stylus Photo 1400
Epson Stylus Photo 1400
- 7
Drukuj stronę