Axxess AX-CH5-SWC Instrukcja instalacji
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt nagrywający Axxess AX-CH5-SWC. Axxess AX-CH5-SWC 16 stron. Chrysler data interface with swc2013-up
Drukuj stronę
Chrysler Data Interface with SWC
*Visit AxxessInterfaces.com for up-to-date vehicle specific applications.
INTERFACE FEATURES
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains audio controls on the steering wheel
• Retains safety chimes
• Retains the factory backup camera (if through the factory radio)
INTERFACE COMPONENTS
• AX-CH5-SWC interface
• AX-CH5-SWC harness
APPLICATIONS
CHRYSLER
FIAT
200 LX
2015-2016
500L
500X
DODGE
JEEP
Dart (small screen option)
Cherokee Sport
2013-2016
Renegade
AxxessInterfaces.com
2013-up*
• Retains the factory AUX-IN jack
• Used in non-amplified models, or when bypassing a factory amplifier
• Fiat 500L only: For use in both amplified and non-amplified systems
• Retains balance and fade (non-amplified models only)
• Micro "B" USB updatable
• 16-pin harness with stripped leads
• 4-pin harness with stripped leads
RAM
2014-up
1500, 2500, 3500
2016-up
(small screen option) 2013-up
Chassis Cab 3500, 4500, 5500
(small screen option) 2013-up
2014-up
2015-up
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
• Female 3.5mm connector with stripped leads
RAM (CONT)
Promaster
(with a 5.0" screen)
Promaster (with NAV)
Promaster City
AX-CH5-SWC
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Connections to be made ................................... 2-4
Installing the AX-CH5-SWC ....................................4
Initializing the AX-CH5-SWC ..................................4
Adjusting the AX-CH5-SWC ...................................5
Steering wheel control settings ........................5-7
- L.E.D. feedback ....................................................5
- Changing radio type ...........................................6
- Resetting the AX-CH5-SWC .................................7
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
2014-up
lights must be connected before cycling the
2014-up
ignition. Also, do not remove the factory radio
2015-up
with the key in the on position, or while the
vehicle is running.
REV. 7/18/17 INSTAX-CH5-SWC