Epson 4000 - Stylus Pro Color Inkjet Printer Podręcznik Start Here - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik Start Here dla Drukarka Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 6 stron. Print engine
Również dla Epson 4000 - Stylus Pro Color Inkjet Printer: Broszura i specyfikacje (4 strony), Podręcznik referencyjny produktu (38 strony), Informacje o produkcie (13 strony), Biuletyn wsparcia produktu (17 strony), Ważne informacje (2 strony), Ograniczona gwarancja (12 strony), Skrócona instrukcja obsługi (11 strony), Broszura i specyfikacje (12 strony), Broszura i specyfikacje (6 strony), Instrukcja konfiguracji (16 strony)

Load Cut Sheet Paper

When you are ready to print on cut sheet paper, make sure you release the paper lever and

wind up the roll paper. Then return the paper lever to the secured position and close the roll

paper cover.

Some papers cannot be used with the paper tray. You need to load them through the front or top

Note:

manual feed slots. See the Printer Guide for details.

Make sure the printer is on and ready

to print.

Pull out the paper tray and cover,

then remove the cover. Flip up the

paper guide roller.

Slide the edge guide all the way to the left.

Thumb through a stack of paper, then gently tap

it on a flat surface to even the edges.

Load the sheets in the portrait

orientation, with the whiter or glossier

printable side face down. Place the paper

all the way back, against the right side of

the tray.

Don't load paper above the arrow mark

inside the edge guide.

Adjust the paper tray and edge guide

according to the paper size. For small

sheets, raise the paper guide and move

it to the edge of the stack.

Flip down the paper guide roller, then

replace the paper tray cover and adjust

its length.

Make sure the roll paper support

Note:

is not raised.

Press the

Paper Source button until you see the

cut sheet icon.

Paper guide

roller