Axxess AX-LR902 Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Elektronika samochodowa Axxess AX-LR902. Axxess AX-LR902 8 stron. Land rover range rover evoque data interface with swc & factory display retention2014

Drukuj stronę

Land Rover Range Rover Evoque Data Interface with SWC & Factory Display Retention

* For models with rear parking sensors

INTERFACE FEATURES

• Provides accessory power

• Designed for non-amplified models

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains audio controls on the steering wheel

• Retains parking sensor chimes

* Attention! The aftermarket radios backup camera input will be used to display the vehicle settings. If the radio doesn't have a backup camera

Input, then there will be no visualization of the vehicle settings. An externally mounted screen could be substituted in this situation.

INTERFACE COMPONENTS

• AX-LR902 interface

• ASWC-1 interface

• AX-LR902 harness

• ASWC-1 harness

• Female 3.5mm connector with stripped leads

• Chime speaker

AxxessInterfaces.com

• Retains balance and fade

• Retains factory features: date, time

• Retains most of the vehicle settings that was displayed on the

factory radio *

• Micro "B" USB updatable

AX-LR902

I N S TA L L AT I O N I N S T R U C T I O N S

2014*

TABLE OF CONTENTS

Connections to be made ....................................2-3

Installing the AX-LR902 interface .........................3

Programming the ASWC-1 interface ................. 3-4

Screen operation ................................................4-6

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell

caps, etc.) • Zip ties

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

REV. 9/25/18 INSTAX-LR902