arcelik 6343 Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Zmywarka arcelik 6343. arcelik 6343 2 stron.

Drukuj stronę

No rinse agent / No salt / Water cut off indicator

Programme lights

Half Load indicators

Perfect Rinse İndicators

Function keys

On/Off button

To turn the machine on, press and hold down the On/Off button for 1

second. Indicator lights on the panel will illuminate. To turn the machine

off, press and hold down the On/Off button for 1 second. In Off

position, indicator lights will turn off.

Programme Selection button

Refer to "Table of Programme Data and Average Consumption Values"

to select a programme suitable for your dishes. Press the Programme

Selection key repeatedly until the light of the programme you want to

select is illuminated.

Start/Pause/Cancel button

It is used to start, pause or cancel a selected programme or function.

When you press the Start / Pause / Cancel key, the washing

programme you have selected will start.

When your machine is in "Pause" mode, one of the programme follow

up buttons will flash.

A To press the Start / Pause / Cancel key, wait for two

seconds after you turn on your machine by pressing the

On / Off key.

Canceling a programme

Press Start / Pause / Cancel key for 3 seconds to cancel the

programme. Stop pressing when Washing and Drying lights flash

at the same time. Water in the machine will be discharged in 45

seconds. When the End light comes on, the programme will have been

cancelled. Then, you can select and operate a new programme.

A There might be residues of detergent or rinse aid left in

the machine and / or on the pieces washed depending

on the step the programme you have cancelled was in.

Water Cut Off Indicator

If the machine cannot take in water, then the Water Cut Off Indicator will light

on the screen. Once the water flows in, the warning indicator will automatically

switch off.

A When the Water Cut Off indicator lights, make sure that the

water is not cut-off and that the tap is off. Call Authorised

Service Agent if water is not cut-off and the tap is open.

Half Load button

If you want to run your machine without loading it completely, place

your dishes into the machine as you desire. First press the On/Off

button. After you have chosen the programme of your choice, press the

Half Load button and see that the Half Load light on the panel is on.

Start the programme by pressing the Start/Pause/Cancel button and

you can save water and power. You can use every part of the upper

and lower baskets by choosing Half Load.

Delayed Start indicator

Programme follow-up indicators

Start/Pause/Cancel button

Delayed Start button

Perfect Rinse Function

Depending on the type of the detergent used, if a detergent dissolving

issue is encountered it will remove the resulting stains from the dishes

and enables the optimum rinsing performance.

Delayed Start

You can delay the startup of the programme up to 9 hours with

Delayed Start button. Press Start/Pause/Cancel key after setting the

Delayed Start. Once the delay time is over, the selected programme

will start automatically.

Every time you press the delayed start button, the 3-6-9 hour lights

will start flashing respectively. If you press on the Start/Delay/Cancel

button while the selected delayed start button is flashing, the delayed

start light will stay on and the countdown will start. When the delay

period is completed, the delayed start light will go off and the selected

washing programme will begin.

A While the 9 hour delayed start lamp is flashing, if you press the

Delayed Start button, the delayed start lights will go off. If you press the

Start/Delay/Cancel button while the Delayed Start Lights are off, the

programme you have selected will start without any delay period.

AYou can follow the amount of delay time left from the delayed start

lights. For Example: Once you have chosen the 9-hour delay period,

when 6 hours is left for the washing programme to start, the 6-hour light

will come on and when there is 3 hours left, the 3-hour light will come

on.

Changing the Delayed Start Time

Press the Start/Pause/Cancel button. The delay time light will start

flashing. You can select the new delay period by pressing the Delayed

Start button again. Save this by pressing Start/Pause/Cancel key

again.

To cancel the Delayed Start;

Press and hold Start / Pause / Cancel key for 3 seconds. The selected

delay time will have been cancelled. Once the cancelation has started,

the water left in the machine will be discharged in 30 seconds.

6343 - 6343 I - 6343 s

Perfect Rinse Function

Half Load button

Programme Selection button

On/Off button

button