Epson 4000 - Stylus Pro Color Inkjet Printer Instrukcja konfiguracji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Drukarka Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 16 stron. Print engine
Również dla Epson 4000 - Stylus Pro Color Inkjet Printer: Broszura i specyfikacje (4 strony), Podręcznik referencyjny produktu (38 strony), Informacje o produkcie (13 strony), Podręcznik Start Here (6 strony), Biuletyn wsparcia produktu (17 strony), Ważne informacje (2 strony), Ograniczona gwarancja (12 strony), Skrócona instrukcja obsługi (11 strony), Broszura i specyfikacje (12 strony), Broszura i specyfikacje (6 strony)

Setting up the printer

Connecting the power cord

1. Check the label on the back of the printer to

make sure the voltage required by the printer

matches that of the power outlet you will be

pulled it into. Also, make sure that you have

the correct power cable for your power source.

Caution:

It is not possible to change the printer's

voltage. If the rated voltage and your outlet

voltage do not match, do not plug in the

power cord, and contact your dealer for

assistance.

2. Connect the power cord to the AC inlet on the

back of the printer.

3. Plug the power cord into a properly grounded

electrical outlet.

Caution:

Do not use an outlet that is controlled by an

automatic timer or wall switch. Otherwise,

accidental shut down or damage to your

printer may occur.

Installing the paper tray

Insert the paper tray into the slots at the front of

the printer.

Installing the Ink Cartridges

Note:

❏ The ink cartridges packed with your printer are

❏ Because the initial ink charging consumes a large

❏ The initial ink charging requires approximately 8

AC inlet

❏ The UltraChrome ink cartridges for Stylus Pro

Warning:

The ink cartridges are self-contained units.

Under ordinary use, ink will not leak from the

cartridges. If ink does get on your hands, wash

them thoroughly with soap and water. If ink gets

into your eyes, flush them immediately with

water.

only for the initial ink charging.

quantity of ink, you may need to replace the ink

cartridges soon.

minutes.

7600/9600 can also be used with this printer.